Inventory

Current Catalog: Product List

Made-Up Sets
1. Tilt-Up Track Type Garage Door Seals, Regular Size–TAD T Series (swinging door)
Range: 8’-2 ½”H x 8’-2 ½”W.
Includes four mitered sections of FF-FS Model with white powder coat aluminum.
Includes four sections of ¾”w regular nylon brush, 8’-2 ½”L ea.” (gray, 19mm).
Includes 24 pop rivet-pack, suitable for installation to metal stud.
Carrier allows seal insert to rotate, reducing ‘jamming’ of door during operation.
Brush attaches to bottom, sides, and top.
Creates a sealing system against dust, pest, smoke, storm, and storm.

2. Tilt-Up Track Type Garage Door Seals, Large Size–TAD T Series (swinging door)
Range: 8’-2 ½”H x 16’-4 ¾”W.
Includes six sections of FF-FS Model with clear anodized class II aluminum (10 mil)
Includes six mitered sections of ¾”w regular nylon brush, 8’-2 ½”L ea.” (gray, 19mm).
Includes 36 pop rivet-pack, suitable for installation to metal stud.
Carrier allows seal insert to rotate, reducing ‘jamming’ of door during operation.
Brush attaches to bottom, sides, and top.
Creates a sealing system against dust, pest, smoke, storm, and storm.

3. Roll-Up Garage Door Side Seals (Jamb), Regular Size—RAD Jambs only Series (Roller Door, or Sectional Overhead Garage Door)
Range: 8’-2 ½”H
Includes two sections of RTS 1070 Model with clear anodized class II aluminum (10 mil)
Includes two sections of 1 5/16”w regular nylon brush, 8’-2 ½”H ea.” (gray, 30 mm).
Includes 10 pop rivet-pack.
Brush attaches to sides jambs.
Creates a sealing system against dust, pest, smoke, storm, and storm.

4. Roll-Up Garage Door Side Seals (Jamb), Regular Size— RAD Jambs only Series (Roller Door, or Sectional Overhead Garage Door)
Includes two sections of RTS 1470 Model (similar to 1070 above) with clear anodized class II aluminum (10 mil).
Includes two sections of 1 5/16”w regular nylon brush, 8’-2 ½”H ea.” (gray, 30 mm).
Includes 10 pop rivet-pack.
Brush attaches to sides jambs.
Creates a sealing system against dust, pest, smoke, storm, and storm.

5. Roll-Up Garage Door Side Seals (Jamb), Regular Size— RAD Jambs only Series (Roller Door, or Sectional Overhead Garage Door)
Range: 8’-2 ½”H
Includes two sections of RTS 1970 Model (similar to 1470 above, but larger) with clear anodized class II aluminum (10 mil).
Includes two sections of 1 5/16”w regular nylon brush, 8’-2 ½”H ea.” (gray, 30 mm).
Includes 2 pop rivet-pack.
Brush attaches to sides jambs.
Creates a sealing system against dust, pest, smoke, storm, and storm.

6. Roll-Up Garage Door Side Seals (Jamb), Regular Size— RAD Jambs only Series (Roller Door, or Sectional Overhead Garage Door)
Range: 8’-2 ½”H
Includes two sections of RTS 2570 Model (similar to 1970 above, but largest size) with clear anodized class II aluminum (10 mil).
Includes two sections of 1 5/16”w regular nylon brush, 8’-2 ½”H ea.” (gray, 30 mm).
Includes 2 pop rivet-pack.
Brush attaches to sides jambs.
Creates a sealing system against dust, pest, smoke, storm, and storm.

7. Roll-Up Garage Door Head Seals (Top or Bottom—not both), Regular Size—RAD HO FTD Series (Head Only, Roller Door—fit to door, or Sect OH Garage Door where track adjustment not practical)
Range: 8’-2 ½”W
Includes one section of 0370 Model (similar to 1970 above, but largest size) with clear anodized class II aluminum (10 mil).
Includes one section of 2”nominal w regular nylon brush, 8’-2 ½”W ea.” (gray, 50 mm).
Includes 8 pop rivet-pack.
Brush attaches to top or bottom jamb.
Creates a sealing system against dust, pest, smoke, storm, and storm.

8. Roll-Up Garage Door Head Seals (Top or Bottom—not both), Regular Size—RAD HO FTD Series (Head Only, Roller Door—fit to door, or Sect OH Garage Door where track adjustment not practical)
Range: 8’-2 ½”W
Includes one section of 0370 Model (similar to 0370 above, but larger brush) with clear anodized class II aluminum (10 mil).
Includes one section of 3”nominal w regular nylon brush, 8’-2 ½”W ea.” (gray, 75 mm).
Includes 8 pop rivet-pack.
Brush attaches to top or bottom jamb.
Creates a sealing system against dust, pest, smoke, storm, and storm.

9. Sectional Overhead Garage Door Jambs (Sides), Regular Size—FTD60-L (Allows carrier system to be affixed to side edges of SOH Door panels. Fit-To-Door side seal system. `Snap-Off` options enable quick, no cutting tool required fixing fin alteration. Door Type suitability: Sectional Overhead or Bi-Panel lift-up counter-weight doors).
Range: 8’-2 ½”H
Includes two section (pair) of FTD60L/25 with clear anodized class II aluminum (10 mil).
Includes two section of ¾” flame resistant brush, 8’-2 ½”H” (gray, 19 mm).
Brush attaches to side of jamb.
Creates a sealing system against dust, pest, smoke, storm, and storm.

10. Sectional Overhead Garage Door Jambs (Top and Sides), Regular Size with Cinderseal—SOH, 5550V (Sectional Overhead Garage Door
Recommended installation position: Internal concealed sides/top).
Range: 7’-3 ½” H x 8’-2 ½”W.
Includes three sections (pair at sides, one at top) of 5550V with clear anodized class II aluminum (10 mil).
Includes two sections of 1/2” flame resistant brush, (2) 7’-3 ½”H (gray 13mm)
Includes 15 pack fasteners for lumber
And one section of ¾” brush, (1) 8’-2-1/2”W (gray, 19 mm).
Brush attaches to side of jamb, and at head.
Creates a sealing system against dust, pest, smoke, storm, and storm.

11. Sectional Overhead Garage Door Jambs (Top and Sides), Regular Size with Cinderseal—SOH, 5550V (Sectional Overhead Garage Door
Recommended installation position: Internal concealed sides/top).
Range: 7’-3 ½” H x 16’-4 ½” W.
Includes four sections (pair at sides, pair at top, joined by Santoprene blade) of 5550V with clear anodized class II aluminum (10 mil).
Includes 20 pack fasteners for lumber
Includes two sections of 1/2” flame resistant brush, (2) 7’-3 ½”H (gray 13mm)
And two section of ¾” brush, (2) 8’-2-1/2”W (gray, 19 mm).
Brush attaches to side of jamb, and at head.Creates a sealing system against dust, pest, smoke, storm, and storm.

12. Cobra M Garage Door Bottom (Bottom), Regular Size—(Replacement retro-Fit bottom of door seal incorporating both external bristle brush and an internal SANTOPRENE flexible blade. COBRA-S will accommodate up to 1 3/8” out of level floor (35mm). Door Type suitability: Sectional Overhead Garage Door , Roller Shutter/Roller Door. Recommended installation position: Retro Fit bottom of Door seal).
Size: 8’-2 1/2” W.
Includes one sections of clear anodized class II aluminum (10 mil).

13. Cobra M Garage Door Bottom (Bottom), Wider Size—(Replacement retro-Fit bottom of door seal incorporating both external bristle brush and an internal SANTOPRENE flexible blade. COBRA-S will accommodate up to 1 3/8” out of level floor (35mm). Door Type suitability: Sectional Overhead Garage Door , Roller Shutter/Roller Door. Recommended installation position: Retro Fit bottom of Door seal).
Size: 9’ – 10 1/16”” W.
Includes one sections of clear anodized class II aluminum (10 mil).

14. Cobra L Garage Door Bottom (Bottom), Regular Size—( Replacement retro-Fit bottom of door seal incorporating both external bristle brush and an internal SANTOPRENE flexible blade. COBRA-S will accommodate up to 2 5/32” out of level floor (55mm). Door Type suitability: Sectional Overhead Garage Door. Roller Shutter/Roller Door. Recommended installation position: Retro Fit bottom of Door seal).
Size: 8’ – 2 ½” W.
Includes one sections of clear anodized class II aluminum (10 mil).

15. Cobra L Garage Door Bottom (Bottom), Wider Regular Size—( Replacement retro-Fit bottom of door seal incorporating both external bristle brush and an internal SANTOPRENE flexible blade. COBRA-S will accommodate up to 2 5/32” out of level floor (55mm). Door Type suitability: Sectional Overhead Garage Door. Roller Shutter/Roller Door. Recommended installation position: Retro Fit bottom of Door seal).
Size: 9’ – 10 1/16” W.
Includes one sections of clear anodized class II aluminum (10 mil).

16. Dinky-Dike Garage Door Bottom (Bottom), Wider Size—( 18mm high barrier to `under door` water intrusion.
Door Type suitability: Roller/Sectional Overhead/Tilt/Swing/Slide. Recommended installation position: To Floor
Dimension 3 ½” w x 11/16” H (88mm wide x 18 mm high). Finish: Natural anodized/Powder Black with YELLOW safety strip. Door Type suitability: Sectional Overhead Garage Door. Roller Shutter/Roller Door. Recommended installation position: Retro Fit bottom of Door seal).
Size: 10’ – 0 1/16” W (3.05M).
Includes one sections of clear anodized class II aluminum (10 mil).

Individual Sections
17. 2W12 (This profile and all others that follow, are 8’-2 1/2” L, and comes in a clear polyethylene sleeve. Grey and black inserts where required).

18. AD5 (slightly larger than 3/16”–5mm brush carrier adaptor extension. Angle of attack: 180`. Finish: Natural anodized).

19. AD8 (Door Type suitability: Slide/Roll/Tilt. Recommended installation position: Side/Top/Bottom. Angle of attack: 90`/180`)

20. 5520V (Sectional Overhead Garage Door. Recommended installation position: Internal concealed sides/top. Angle of attack: 55`. Fixing Fin size: 25/32”–20mm).

21. 5550V (Door Type suitability: Sectional Overhead Garage Door. Recommended installation position: Internal concealed sides/top. Angle of attack: 55`).

22. RT370 (Fit-To-Door Top Seal. Fit-Under-Guide side seal, Fit-To-wall semi-concealed side/top seal. Door Type suitability: Roller Shutter/Roller Door ( Fit-To-Door ), Roller Shutter side seal ( `U` channel Guide ), Sectional Overhead where track adjustment not practical. Recommended installation position: Internal concealed sides/top. Angle of attack: 70`).

23. 3050V (Door Type suitability: Sectional Overhead Garage Door. Roller shutter/Roller door. Recommended installation position: Internal concealed top. External exposed sides/top. Angle of attack: 60/30`)

24. 3065V (Door Type suitability: Sectional Overhead Garage Door. Roller shutter/Roller door. Recommended installation position: Internal concealed top. External exposed sides/top . Angle of attack: 60/30`)

25. Cobra-L (Replacement retro-Fit bottom of door seal incorporating both external bristle brush and an internal SANTOPRENE flexible blade.

26. COBRA-S will accommodate up to 55mm out of level floor. Door Type suitability: Sectional Overhead Garage Door. Roller Shutter/Roller Door. Recommended installation position: Retro Fit bottom of Door seal. Angle of attack: 60`)

27. Cobra-M (Replacement retro-Fit bottom of door seal incorporating both external bristle brush and an internal SANTOPRENE flexible blade.

28. COBRA-S will accommodate up to 35mm out of level floor. Door Type suitability: Sectional Overhead Garage Door. Roller Shutter/Roller Door. Recommended installation position: Retro Fit bottom of Door seal. Angle of attack: 60`)

29. FF-FS (#FACE FIX FLEXI-SEAL. Unique design allows seal insert to `rotate` within aluminum carrier. Fit-To-Door either side, top & bottom. Door Type suitability: Single Panel Tilt up doors. `T`& `J` ( Track & Jamb type ). Bi-Panel lift-up counter-weight doors. 3 Hinged or swing doors. Recommended installation position: Face fitted as `retro-fit` to existing doors on all models of `Tilt up` & Bi-Panel counter weight doors. As a fit bottom of door to swing & hinged doors. As jamb & Head seal on Hinged & Swing type doors. Angle of attack: 52` through to 142`, 76 degrees of rotation).

30. 67540 (Two direction seal system. Fit-To-Door under guide side seal. Internal concealed wall mounted seal side/top. Door Type suitability: Roller Door, Sectional Overhead Garage Door. Recommended installation position: Semi-Concealed side seal ( Fit-Under-Guide ). Option as side seal where head is protruding in past the jambs or as the top seal where the head is set forward of the jambs. Angle of attack: 70`. Fixing Fin size: Variable 40/15mm).

31. RTS1470 (Two direction seal system. Fit-To-Door under guide side seal Series `A`. Internal concealed wall mounted seal side/top. Door Type suitability: Roller Door Series `A` . Sectional Overhead Garage Door. Recommended installation position: Semi-Concealed side seal ( Fit-Under-Guide ). Option as side seal where head is protruding in past the jambs or as the top seal where the head is set forward of the jambs. Angle of attack: 70`).

32. RTS1970 (Two direction seal system. Fit-To-Door under guide side seal CENTURION Series `AA`. Internal concealed wall mounted seal side/top. Door Type suitability: Roller Door CENTURION Series `AA` 2 Sectional Overhead Garage Door. Recommended installation position: Semi-Concealed side seal ( Fit-Under-Guide ) Option as side seal where head is protruding in past the jambs or as the top seal where the head is set forward of the jambs. Angle of attack: 70`).

33. RTS2570 (Two direction seal system. Fit-To-Door under guide side seal Series `AA`. Internal concealed wall mounted seal side/top. Door Type suitability: Roller Door Series `AA`. Sectional Overhead Garage Door. Recommended installation position: Semi-Concealed side seal ( Fit-Under-Guide ). Option as side seal where head is protruding in past the jambs or as the top seal where the head is set forward of the jambs. Angle of attack: 70`

34. 9050V (Door Type suitability: Slide/Roll/Tilt. Recommended installation position: Side/Top/Bottom. Angle of attack: 90`).

35. 0050V (Door Type suitability: Slide/Roll/Tilt. Recommended installation position: Side/Top/Bottom. Angle of attack: 180`)

36.  FTD60 (#Allows carrier system to be affixed to side edges of SOH Door panels. Fit-To-Door side seal system.  `Snap-Off` options enable quick, no cutting tool required fixing fin alteration.  Door Type suitability:  Sectional Overhead,  Bi-Panel lift-up counter-weight doors.  Recommended installation position:  Options are as Side fitted as `in production`, on site prior to installation or as `retro-Fit` post door installation. Angle of attack:  60`).

37.  FTDL ((#LLFTD60 #LONG LEG FIT TO DOOR 60, Allows carrier system to be affixed to side edges of SOH Door panels. Fit-To-Door side seal system. `Snap-Off` options enable quick, no cutting tool required fixing fin alteration.  Door Type suitability:  Sectional Overhead.  Bi-Panel lift-up counter-weight doors.  Recommended installation position:  Options are as Side fitted as `in production`, on site prior to installation or as `retro-Fit` post door installation.  Angle of attack:  60`).

38. Sectional Overhead Garage Door Jambs (Top and Sides), Extra Wide Size with Cinderseal—SOH, 5550V (Sectional Overhead Garage Door. Recommended installation position: Internal concealed sides/top).
Range: 7’-3 ½” H x 10’-0” W.
Includes three sections (pair at sides, one wide at top) of 5550V with clear anodized class II aluminum (10 mil).
Includes two sections of 1/2” flame resistant brush, (2) 7’-3 ½”H (gray 13mm)
And one section of ¾” brush, (1) 10’-0” W (gray, 19 mm).
Brush attaches to side of jamb, and at head.
Creates a sealing system against dust, pest, smoke, storm, and storm.

——————————
CinderSeal
5880 SW Ralston Dr, Portland OR 98

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: